HOMEPAGE PORTABLE HEATERS TRAILER HEATERS HOT BOX UNITS SEAM HEATERS SPECIALTY ITEMS
CONTACT INFO ASPHALT REPAIRS DECORATIVE ASPHALT  PHOTOS & VIDEOS PRODUCT LISTING COMPANY INFO
 
608-298-9301
Asphalt Reheat Systems gives you the opportunity to make cold asphalt material hot and ready to use in only 30 minutes for just pennies.  Keeping with the uniform design of all A.R.S. products, the Hot Box allows either of the 4x4 portable heaters to be used as a heat source.  The highly insulated Hot Box allows you to heat any new or old asphalt products, including; millings, excess material or precut squares and make true hot asphalt repairs anytime anywhere. The 16 foot Hot Box Trailer has plenty of room for additional heaters and/or plate compactors, all needed hand tools, and spare propane tanks.  It also come standard with a 1000lb hoist for easy lifting of equipment and two easily removable access ramps.
Printable Info Sheet on Hot Box Units (Click Here)
 

Quick Specs

Heating Area: 32 Cubic Ft.
Weight: 600 lbs.
Dimensions: L= 53”  W= 53"  H= 29"
Capacity: 1 Ton of Asphalt        
Options: Use a 4x4 or 4x4-SC as Heat Source.
                 Trailer and Truck Bed Mountable
Heating Times: 30 minutes for reheating avg. amount
Usage: Reheating cold asphalt & keeping asphalt warm

           or quality hot repairs and patches.

 
1-Ton Hot Box
These universal units can easily be mounted just about anywhere you might need hot asphalt material. You can install this Standard Hot Box in the bed of a pickup or on a small trailer for easy transportation to any location. The highly insulated boxes have a heat timer control and a quick connect gas regulator.
 
A 4x4 unit is needed as the heat source in order to keep material warm for long periods of time or reheating cold asphalt.  Two insulated lids seal the top closed to help contain heat within the box and open all the way for easy loading. With multiple easy to open access areas you are able to take one shovel full at a time or unload all of the hot material at once.
 

Quick Specs

Heating Area: 34 Cubic Ft.

Weight: 800 lbs.

Dimensions: L= 76”  W= 53”  H= 45”

Capacity: 2 Ton of Asphalt        

Options: Split Channel (Able to heat 2x6 areas),

              High Output, 1000 lb. Swivel Hoist 

Heating Times: 30 minutes for reheating avg. amount

Usage: Reheating cold asphalt & keeping asphalt warm

           or quality hot repairs and patches.
 
2-Ton Hot Box
These universal units can easily be mounted just about anywhere you might need hot asphalt material. You can install this 2-Ton Hot Box on the deck of a flatbed pickup or on a suitable trailer for easy transportation to any location. The highly insulated boxes have a heat timer control and a quick connect gas regulator.
 
A 4x4 unit is needed as the heat source in order to keep material warm for long periods of time or reheating cold asphalt.  Two insulated lids seal the top closed to help contain heat within the box and open all the way for easy loading. With multiple easy to open access areas you are able to take one shovel full at a time or unload all of the hot material at once.
 
Hot Box Trailer Unit

Quick Specs

Heating Area: 16 SQ FT & up to 1 Ton of Asphalt

Weight: 2600 lbs.

Dimensions: L= 198"   W= 96"   H= 78"        

Options: Comes with 1 Portable 4x4 Heater, may be a
              High Output or Split Channel (extra $),
              and Removable 1 Ton Hot Box Unit

Heating Times: Avg. surface pliable in - 5 Min.

Fuel Consumption: At least 3 hrs on 20lb tank.

Usage: 1 man can complete any small to mid-sized repair

            or patch with hot asphalt by himself.
 

 

A.R.S. offers this great unit to help you successfully make the perfect repairs with a hot patching system. The Hot Box Trailer Unit comes with the necessities to     complete the typical patch. A Standard Hot Box is mounted to a flat 14’ ramp trailer, leaving room for  extra propane tanks, tools, and a compactor or another portable heater.
 
With this unit, a single worker is able to complete a typical repair with warm material, unload then load the heater and a plate compactor without the need for another worker. The unit comes standard with an insulated Hot Box, a 4x4 Portable Heater, and a 1000 lb. hoist to easily lift the heater on or off of the hot box.  The 4x4 heater can be used as a portable unit completely independent from the trailer in order to make a legitimate hot asphalt repair.   
Printable Info Sheet on Hot Box Units (Click Here)
HOMEPAGE PORTABLE HEATERS TRAILER HEATERS HOT BOX UNITS SEAM HEATERS SPECIALTY ITEMS
CONTACT INFO ASPHALT REPAIRS DECORATIVE ASPHALT  PHOTOS & VIDEOS PRODUCT LISTING COMPANY INFO

Copyright © 2007.  All Rights Reserved. Asphalt Reheat Systems. LLC