|
Asphalt Reheat Systems offers some
of the best Seam Heaters on the market, which all use the same radiant
blue-flame technology as the rest of the A.R.S. line. With
the rolling blue flame, no scorching flame will be applied to the
surface, therefore reducing the risk of burning any new asphalt
and creating a superior longitudinal joint. Unlike many
infrared units, an electric blower is not used to power
the fuel system, thus eliminating the need for generators and/or
large batteries as its source of power. These units are equipped
with quick fuel and electrical connections as well as an onboard
battery charger that can be plugged into any outlet when
necessary.
|
|
Printable Info Sheet on Seam Heaters (Click Here) |
|
|
|
Quick Specs |
|
Heating Area: 16 Linear FT |
|
Weight:
855 lbs. |
|
Dimensions:
L= 112"
(transport)
214” (operating) |
|
W= 49"
(transport)
33” (operating) |
|
H= 41"
(transport)
33” (operating) |
|
Options:
Manual (battery-paver-motion controls) |
|
Automatic
(same as manual plus automatic |
|
temp regulation & individual box controls) |
|
Heating Times:
Avg. 25 FT/Min @
250°F |
|
Fuel Consumption:
At least 2 hrs per 20lbs of LP |
|
Usage:
Reheating cold paving joints, stamping |
|
extensive borders,
blending uneven seams. |
|
|
|
16' Seam Heater
|
|
|
The standard Seam Heater can heat an area of one foot wide by 16 feet
long when opened to its operating position. It has four separate, four
foot heating sections that can be turned on and off independent from
one another.
This unit also has a versatile design that allows it to be attached on
a variety of pavers on either side. This unit is also available with
the optional automatic thermo output control, which has the capability
of maintaining a joint temperature of 250 degrees at paving speeds up
to 25 feet per minute on an average day.
This unit is typically used during the paving process to heat a
previously laid asphalt mat’s edge while the paver lays its adjoining
hot mix. Projects the are being used on include; highways, roads,
parking lots, night work, airport taxiways and runways.
|
|
|
|
Quick Specs |
|
Heating Area: 24 Linear FT |
|
Weight:
1115 lbs. |
|
Dimensions:
L= 166”
(transport) 293” (operating) |
|
W= 49"
(transport)
33” (operating) |
|
H= 41"
(transport)
33” (operating) |
|
Options:
Manual (battery-paver-motion controls) |
|
Automatic
(same as manual plus automatic
|
|
temp regulation & individual box controls) |
|
Heating Times:
Avg. 40 FT/Min @
250°F |
|
Fuel Consumption:
At least 1 hrs per 20lbs of LP |
|
Usage:
Reheating cold paving joints, stamping |
|
extensive borders,
blending uneven seams. |
|
|
|
24'
Seam Heater
|
|
|
This Seam Heater can heat an area of one foot wide by 24 feet long
when opened to its operating position. The EXT version has six
separate four foot heating sections that can be turned on and off
independent from one another.
This unit is so versatile that it can be attached to a variety of
pavers on either side. With an optional automatic thermo output
control, this Seam Heater has the capability of maintaining a joint
temperature of 250 degrees at paving speeds up to 40 feet per minute
on an average day.
This unit is typically used during the paving process to heat a
previously laid asphalt mat’s edge while the paver lays its adjoining
hot mix. Projects the are being used on include; highways, roads,
large parking lots, night work, airport taxiways and runways.
|
|
